MACHINERY INDUSTRY

The machinery industry is a locomotive sector with a triggering power due to the value it creates, its necessity for technology production, the extensive network of auxiliary industries it forms, its ability to reduce investment costs, the employment opportunities it provides for skilled personnel, and its role in decreasing foreign dependency and trade deficits. Additionally, it supplies inputs to many other sectors. In the development process of countries, the importance of the machinery manufacturing industry within the manufacturing sector is steadily increasing. When examining the exports of developed countries, it is observed that the machinery and equipment sector accounts for around 20% of their export share.

DEVELOPMENT OF THE SECTOR IN TÜRKİYE


The foundations of the industrial sector in Türkiye were laid by the state during the First and Second Five-Year Industrial Plans, as the private sector lacked sufficient capital accumulation in the early years of the Republic. Although the majority of industrial establishments under the plan focused on producing basic consumer goods, facilities for producing intermediate goods were also included. Over time, the plan was implemented in a way that created beneficial industrial opportunities for private entrepreneurs as well. Periodic incentive and grant packages opened the way for the machinery manufacturing sector, and with the transition to a mixed economy, the sector's development accelerated.

On May 22, 2008, the Business and Construction Machinery Cluster (İŞİM) was established between OSTİM Organized Industrial Zone and Çankaya University, and since then, various activities have been carried out by this cluster.

The Machinery Promotion Group (MTG) was established by the Board of Directors of the Central Anatolian Machinery and Components Exporters' Association to promote the machinery sector more effectively abroad, increase exports of machinery and components, enhance the sector’s image both domestically and internationally, and to organize branding, R&D, and joint promotional activities. The necessary funding for these activities was decided upon and approved at the association’s 2006 Ordinary General Assembly held on April 11, 2007, marking the official launch of the group.

SECTORAL OVERVIEW


The machinery manufacturing industry, as is the case worldwide, is the driving force behind Türkiye’s industrialization and is clearly set to remain a cornerstone of its future development. Since 1990, the sector has exhibited an annual growth rate of approximately 20% and is currently on a recovery path in terms of export figures. The Turkish machinery and equipment sector generates an annual foreign trade volume of around 40 billion USD.

 

According to the TOBB Member Database, 0.7 out of every 100 registered employees in Türkiye work in the machinery and equipment manufacturing sector. Among every 100 people employed in this sector, 6 are engineers. Of every 100 companies operating in Türkiye, 0.5 are active in the machinery and equipment manufacturing sector. The machinery and equipment manufacturing sector accounts for 0.3% of the pre-tax profits of firms operating in the private sector.

The most important sub-sectors within the Machinery and Equipment Sector are the “Construction Machinery Sector,” the “Machine Tools Sector,” and the “Agricultural Machinery Sector.”

The sub-sectors of the machinery and manufacturing industry are experiencing dynamic and evolving processes. In recent years, the agricultural machinery industry has also stood out as one of the sectors increasing domestic production capacity.

In Türkiye, the machinery manufacturing industry is more concentrated around certain provinces. These include Bursa, Istanbul, Kocaeli, primarily, as well as the Marmara Region including Thrace, İzmir, Eskişehir, Ankara, Konya, and Gaziantep. The Çukurova Region is also included in this scope. In machine tool manufacturing, Bursa, Kocaeli, Istanbul, İzmir, and Konya are more prominent, whereas Gaziantep prioritizes textile (including carpet weaving), food industry machinery, and construction machinery. Due to its proximity to neighboring countries and increased opportunities for cooperation, Gaziantep has recently seen growth in the production of various types of machinery.

SECTORAL ANALYSIS


The machinery and equipment manufacturing sector closed the year 2013 with exports of 12.8 billion USD and imports of 23.4 billion USD. According to data from the Machinery and Equipment Exporters’ Association (MAİB), the sector’s exports increased by 8.5% in the first seven months of 2014 compared to the same period last year, reaching 8.7 billion USD. While the sector continues to show a steady increase in exports, the export-to-import coverage ratio, which was 45.2% in the first six months of the previous year, rose to 52.3% in the same period this year.

In machinery exports, Türkiye achieved a 13.8% increase in exports to Germany—which holds a 16% share of Türkiye’s machinery exports—during the January-June period of 2014. Exports to the United States, ranked second as the largest machinery export destination, increased by 27.9%, while exports to the United Kingdom, ranked third, grew by 1.7%.

As part of the "Türkiye’s 2023 Export Strategy Sectoral Breakdown Project" led by the Turkish Exporters Assembly (TİM), it is projected that machinery and equipment sector exports will reach 100 billion USD in 2023 to achieve the targeted total export figure of 500 billion USD. This initiative aims to secure a 2.3% share of the global market, with an average annual growth rate of 17.8% and a sector share of 18.34% within Türkiye’s total exports.

Turkish machinery manufacturers, who export to over 200 countries, believe that $25 billion of the $47 billion current deficit in the machinery sector can be covered through exports. However, sector representatives also highlight unresolved issues that require attention.

One of the problems cited is that regional incentives and R&D incentives do not align well with the structure of the sector and are insufficient. According to industry players, to address these issues, amendments should be made to Law No. 5746 to apply a ratio based on the number of employees in the enterprise for the sector; engineers working in R&D and production should also be recognized as R&D personnel; and incentives should be applied across the sector without regional disparities.

It is also emphasized that the insufficiency of long-term buyer credits and financing opportunities causes financial difficulties in the sector, which operates with low profit margins. There is a need for an innovative mechanism that will eliminate credit risks in exports, provide long-term financing, and offer micro and small enterprises in the domestic market the opportunity to invest in machinery and equipment without requiring collateral.

Sector representatives believe that in order to provide smooth financing by creating security in terms of ownership of goods for the banking sector, authorization should be granted to establish a machinery registration system within TOBB (The Union of Chambers and Commodity Exchanges of Türkiye) to register and license certain machinery in Türkiye according to specified criteria.

Additionally, it is emphasized that the 18% VAT applied to investment goods in the sector leads to unfair competition and informality. Representatives of the machinery sector point out that a significant portion of SMEs make their machinery purchases without using incentive certificates or leasing, and they demand that the VAT rate be reduced to 8% for all subcategories within the sector.

It is noted that in distant markets such as America and the Far East, it is very difficult for SME-scale manufacturers to search for markets or gain market share on their own. This situation is expected to encourage cooperation among SME machinery manufacturers, which is otherwise rare. According to sector actors, in markets with significant cultural differences, like the Far East, the efforts of companies alone will not be sufficient. Professional support from commercial attachés will definitely be necessary. This support is essential to ensure that companies’ initiatives and resources do not go to waste. All these efforts are seen as investments with medium- and long-term returns.

Source: Dünya Gazetesi